Dimarzio ClipLock Manuel d'utilisateur télécharger pdf

DiMarzio

ClipLock

INSTALLATION INSTRUCTIONS

1. You will need a Phillips screwdriver with a good tip. Do not

attempt installation with a worn-out screwdriver. Remove the

strap bushings and screws from your guitar. They will not be

used with your new DiMarzio

ClipLock

strap.

2. Select the enclosed screws that match the thickness

of the

original screws. Most Fender and other American-made

guitars use the enclosed thin chrome screws with chrome

ClipLock

bushings and white washers. Most Ibanez and

some other guitars use the thicker black screws in the

enclosed bag with the black ClipLock

bushings and black

washers. Our screws are longer than your original screws.

3. Assemble the parts as shown: the screw goes through the

big end of the ClipLock

bushing, the bushing goes through

the hole in the strap end, then the washer slides onto the

screw.

4. Screw the entire assembly tightly into the original strap

bushing screw hole of your guitar. Repeat with the second

assembly. NOTE: The screws must go all the way in, and

should require only moderate force. If the screws seem too

tight or won’t go all the way in, remove the screws and rub the

screw threads on a bar of soap before installation. Do not use

excessive force. If your guitar body is exceptionally hard, you

may need to drill a pilot hole as in step 6.

5. If your original strap button screw does not match the

thickness of either size of enclosed screw, you should glue

dowels into the existing strap button screw holes and drill new

holes as in step 6.

6. If you are building a new guitar that does not have pre-

drilled holes, use the black screws, bushings and washers

and drill a pilot hole using a 3/32” drill (2.4mm) for a hardwood

body or a 5/64” drill (2mm) for a softwood body.

DiMarzio Inc.

1388 Richmond Terrace

P.O. Box 100387

Staten Island, NY 10310

USA

www.dimarzio.com

guitar washer strap bushing screw

DiMarzio 1
ClipLock 1

Résumé du contenu

Page 1 - ClipLock

DiMarzio® ClipLock® INSTALLATION INSTRUCTIONS 1. You will need a Phillips screwdriver with a good tip. Do not attempt installation with a worn-out

Commentaires sur ces manuels

Pas de commentaire

Dimarzio ClipLock Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Instruments de musique Dimarzio ClipLock. DiMarzio ClipLock User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Instruments de musique Dimarzio ClipLock